Yield Strength (Yield Point / Proof Stress / Rp 0.2%)
Engineering definition, metallurgical mechanisms, standard testing specifications, and manufacturing guidelines for closed-die forgings up to 50 kg.
Quick AnswerFeatured
The stress level at which a metal begins to deform plastically and permanently, typically measured at 0.2% non-proportional plastic offset.
Technical Explanation & Metallurgical Principles
Yield strength is the critical engineering design parameter for pressure equipment, flanges, and load-bearing shafts. If applied working stress remains below the yield point, the metal deforms elastically and returns to its original dimensions upon load release. Exceeding yield strength causes permanent plastic distortion.
Key Engineering Specifications & Parameters
| Technical Parameter / Metric | Engineering Benchmark / Value |
|---|---|
| Offset Standard | 0.2% offset (Rp 0.2% / 0.2% Proof Stress) |
| ASTM A105 Yield | ≥ 250 MPa (36 ksi) |
| Duplex 2205 Yield | ≥ 450 MPa (65 ksi) |
| A694 F65 Yield | ≥ 450 MPa (65 ksi) |
Application at Jayesh Forge (Rajkot Plant)
Certified on automated computerized tensile test frames at our Rajkot QA lab, recorded on the official 3.1 MTC.
Related Materials, Standards & Products
Applicable Material Grades
Engineered Product Lines
Related Metallurgical & Testing Terms
Tensile Strength (Ultimate Tensile Strength / UTS / Rm)
The maximum tensile engineering stress that a material can withstand while being stretched or pulled before necking and fracture occur.
Elongation (Percent Elongation A5)
The percentage increase in original gauge length that a tensile test specimen undergoes prior to fracturing, measuring fundamental metal ductility.
Reduction of Area (Percent Reduction Z%)
The percentage decrease in the cross-sectional area of a tensile specimen at the fractured neck compared to its original cross-sectional area.
Questions Regarding Yield Strength (Yield Point / Proof Stress / Rp 0.2%)
Austenitic steels (SS 304/316) have an FCC crystal structure with low resistance to initial dislocation glide (~205 MPa yield); Duplex 2205 has a dual-phase grain-boundary-strengthened structure yielding ≥450 MPa.
Request a Forging Quote with Yield Strength (Yield Point / Proof Stress / Rp 0.2%) Compliance
Our Rajkot metallurgy desk is ready to review your technical drawings, testing protocols, and delivery schedules for custom closed-die forgings strictly up to 50 kg.